SuperCool Solar Control series ensures the highest level of protection in terms of overall rejection within full heat generating bandwidth in the solar spectrum relative to preferred sunlight penetration. This comprises of InfraRed Radiation (NIR), full Ultraviolet (UV) wavelength up to 400nanometers, and Visible Light Transmission (VLT).
Quality assurance means that each roll of films produced for a particular product series, will be of consistent colour, stable test results and reliable adhesive. This is to create a seamless look, optimum protection, while at the same time, future defects due to wear and tear is brought down to the lowest possibility. We conduct vigorous performance and adhesion testing to ensure our products perform as expected in various conditions according to the different categories.
We are confident of providing our valued customers with a long warranty – demonstrating our confidence in our products. Our films utilize the latest technological advances in film manufacturing. Ensuring highest level of satisfaction. Regardless, our team will deliver our best to professionally answer any queries or, rectify defects you may encounter, or are unsure of.
SuperCool offers exceptional quality films that ensure colour stability throughout their lifetime.
Retaining clarity is good for aesthetics. SuperCool solar control series offers outstanding optical clear products with high luminous efficacy to allow maximum sunlight with low reflectivity appearance.
SuperCool uses superior Acrylic Pressure Sensitive Adhesives to ensure your film’s optimal performance. Poor quality adhesives can cause bad adherence to surface, resulting in future adhesion failure such as blurred vision and air bubbling.
SUPERCOOL SS 8000 Series solar film uses the latest sputtering technology to construct an ultra-optical clarity polyester film to achieve the highest spectrally selective result. Spectrally selective refers to reflecting specific wavelengths of the solar spectrum (particularly infra-red heat portion), while maintaining a high visible light transmission. This creates a sophisticated product that is capable of significantly reducing the heat build-up in the interior by consistently resisting heat absorption. Even though this range of solar films is manufactured by depositing 12 layers of precious metals using the cutting-edge multi-layer sputtering technology to achieve superior heat control, the neutral appearances of non-reflectivity are not compromised.
SS 8040 • SS 8070 • SS 8825* • SS 8835* • SS 8865*
* 3mil thickness for enhanced safety performance
SUPERCOOL SC 7000 Series solar films is the highest range of non-reflective solar control film products that uses different types of ceramic materials, such as carbon, on Nano technology to achieve a capability of rejecting InfraRed rays at a maximum of up to 99%. This series of superior quality polyester films which are high in hardness, can block away Total Solar Energy by up to 82% (SC 7010). Non-metallized inorganic components are used in the manufacturing of this series and thus eliminate the possibility of oxidation. Consistent heat rejection and colour stability throughout the life-span are the main concern when producing this series.
SC 7010 • SC 7020 • SC 7040 • SC 7055 • SC 7070
SUPERCOOL SC 6000 Series solar films are specially designed to achieve the capability of blocking a maximum 100% Ultra-violet (UV) light at 400nm wavelength. This band of UV, normally referred to as UV-A, is considered the most harmful radiation. It constitutes majority of UV rays that reach the Earth, and is can penetrate deep into the human skin’s layers that may result in harmful effects on the skin, eye and immune system. Constructed using nano-ceramic technology together with inorganic materials, this series of solar films combines optimum heat rejection, eliminates discolouration probability, and creates a non-reflectivity outlook.
SC 6005 • SC 6020 • SC 6035 • SC 6065
SUPERCOOL SN 5000 Series solar films are manufactured using Electron Beam Evaporation technology with the main component nickel, to create a high corrosion-resistant product, while at the same time, capable of excellent heat rejection coupled with beautiful aesthetics. The SN 5000 Series is constructed using 2 ply of polyester but the darker shades, SN 5005 and SN 5010, are made using 3 ply of polyester. Though having double layers of metallization, the SN 5000 Series are created with low reflectivity while giving maximum heat rejection of up to 80% Total Solar Energy Rejected (TSER).
SN 5005 • SN 5010 • SN 5020 • SN 5030 • SN 5040
SUPERCOOL SR 4000 Series is our only selection of solar film series with two unique ranges of high quality products.
The infusion hybrid models made use of the colour stable capability of carbon minerals to combine with a layer of aluminium on the exterior, to optimise the heat rejection level while creating a non-reflective outlook.
SR 4010 • SR 4025
The reflective range comes in single-way mirror reflective and dual-way mirror reflective. Though using high level of metallized elements to create the silver reflective outlook, and achieving high heat rejection, this category of films does not compromise on early oxidation possibility. The SR 4000 Series is also used by many home-owners to achieve daytime privacy, and interior decorative effects.
SR 4005 SB • SR 4005 SG • SR 4020 SS • SR 4035 SS • SR 4050 SS • SR 4010 GS • SR 4010 RS
SUPERCOOL SE 3000 Series is a new innovation that uses the nano-infusion technology to manufacture high performance non-reflective solar films. This manufacturing process combines the polyester resin, ceramic minerals, and other required materials through the infusing method. Exploring cost-effectiveness, optimum heat rejection and discolouration prevention, the SE 3000 Series gives home-owners the best of everything solar films has to offer.
SE 3010 • SE 3020 • SE 3035 • SE 3060 • SE 3070
SUPERCOOL SE 2000 Series uses one of the most advanced manufacturing methods to create high performance solar control films, with inorganic ceramic compounds and sputtering technology. It takes advantage of the combined benefits of ceramic and sputtering process to create a high heat rejection capability, superior optical clarity and low reflective aesthetics.
SE 2010 • SE 2020 • SE 2035 • SE 2050 • SE 2070
SUPERCOOL SE 1000 Series is the entry-level solar film series that is most suitable to achieve basic requirements that a home owner needs, in order to protect against discomfort and damages caused by the sun. Refining the traditional dyed/dyed-metallized manufacturing methods using infusion technology, this range of solar films will be able to withstand longer periods of sun exposure.
SE 1005 RB • SE 1010 • SE 1020 • SE 1030 • SE 1040 • SE 1050
UPPER SERANGOON CRESCENT
DAIRY FARM HEIGHTS
RESALE UNIT 1
CHOA CHU KANG
RESALE UNIT 2
NEW INDUSTRIAL ROAD
ARU MUGAN ROAD
You may wish to take note of some details that may affect the job process due to certain conditions. For example, fixed/invisible window grilles, above normal height, and removal of existing films or stickers if you have bought a resale house that has been previously installed with.
Before renovation, interim renovation and after renovation are also points to take note of when arranging for window film installation. This is because window films are highly sensitive to dust, therefore, a clean environment is always preferred.
Obstructions such as furniture, build-in carpentry, and blinds or curtains, are generally preferred to be avoided prior to window films installation.
In order for us to provide an appropriate and adequate advice, it is important to determine the objectives you would like to achieve from installing solar films. On a general basis, all films are capable of reducing heat entering your premise, cut off sun glare to a level of your preference, and block away at least 99% of UltraViolet (UV) radiation.
Yes, solar films are constructed by using many kinds of technology ranging from the traditional dyed and coating process with, or without metallized content, to advanced infusion technology of the polyester resin, together with various minerals and components to create optimum stability of the product. Ceramic based solar films are more commonly used locally as it does not create a reflective surface. Examples of other types include Electron-Beamed Evaporation, Vapor Coated and Sputtering.
We mainly go by the area required that is entrusted to us. It is easily quantifiable once we know the window dimensions like length and breadth. However, for more complex tasks such as inaccessible spots or highly elevated windows, we will need to factor in the costs of scaffolding, or boom lift, before a total price can be generated. An on-site review of the premise is sometimes necessary.
As always, we will be holistic in our approach and list down our charges in a comprehensive manner, so you know what the job entails and exactly what you are paying for.
Please refer to our Online Quote as it covers a fairly accurate costing for our window film work.
It depends. If you live in a condominium, do check with your MCST if there are any rules, that govern window colour/tint, or reflection amounts.
As a generally guideline, if the film isn’t too strong in colour (e.g. red or silverish), it will be deemed acceptable by the management. For exterior reflection, if it is highly reflective, you could cause the sun rays to be reflected into your neighbour’s house, and caused undue glare and annoyance.
7030 Ang Mo Kio Avenue 5,
#05-34 Northstar @ AMK,
+65 6570 1813 (Office)
+65 8533 7577 (Max)
+65 9848 5845 (Shaun)
+65 6300 6211